et-loader

DL380 G3 X3.06GHz 512KB/533 1GB 1P RCK AP - 310587-371

Category

Keywords
Bezel (1)
Bracket (3)
Bus Bar (2)
Cable Kit (3)
Cage (2)
Cover (4)
Divider (1)
Drive (3)
Ejector (2)
Fan (1)
Hardware Kit (1)
Memory (DIMM) (1)
Memory Module (1)
Module (1)
Panel (1)
PC Board (5)
Plastics Kit (8)
Power Cord (1)
Power Module (1)
Power Supply (1)
Processor (1)
Rack Mount Kit (1)
Terminator (2)
HPE Upgrade for HPE Server
HPE 142258-003
HPE 142258-003
HPE AC Power Distribution Unit (PDU) power cord (Black) - 250V, 16AWG, 3m (9.8ft) long - Has C14 (M) connector to C13 (F) connector

For price and availability, click request quote

HPE 228495-001
HPE 228495-001
HPE PCI card cage assembly - Includes the PCI cage assembly, PCI riser board (with one 33MHz 5.0V slot and two 66MHz 3.3V slots), and PCI expansion board ejector/divider assembly

For price and availability, click request quote

HPE 228498-001
HPE 228498-001
HPE Tape drive blank (cover) - To fill empty slot above the hard drive when a tape drive is not installed

For price and availability, click request quote

HPE 228503-001
HPE 228503-001
HPE Power switch / LED board assembly - Includes the lighted power switch, UID lighted switch, and status LEDs

For price and availability, click request quote

HPE 228504-001
HPE 228504-001
HPE Optical drive adapter board - Mounts at the rear of the optical drive bay - PC board with two connectors and two thumbscrews

For price and availability, click request quote

HPE 228507-001
HPE 228507-001
HPE Slimline 1.44MB floppy disk drive (with Carbon Black faceplate) - Includes floppy drive interface cable - 12.7mm (0.5-inch) height

For price and availability, click request quote

HPE 228516-001
HPE 228516-001
HPE Miscellaneous Plastics Kit - Includes two PCI slot release levers, two PCI riser cage door latches, one PCI shipping bracket, rear PCI lightpipe, PCI lightpipe cover, thumbscrew with molded cap, and 10 pairs of standoffs - For StorageWorks NAS B2000 (original version)

For price and availability, click request quote

HPE 228518-001
HPE 228518-001
HPE Signal cable kit - Includes 14-pin power button/LED cable, 50-pin CD MultiBay cable, and PCI hot-plug backplane cable

For price and availability, click request quote

HPE 228527-001
HPE 228527-001
HPE Hardware Kit - Includes three PCI expansion slot covers, four T-15 flathead screws, and six 6-32 x 0.2-inch screws

For price and availability, click request quote

HPE 230979-001
HPE 230979-001
HPE Plastics kit - Includes tower model feet, receptacle, door snap, retainer, card guide, PCI, fasteners, 0.15-inch and 0.202-inch plastic standoffs, clip, cable, adhesive, 1.77-inch, clip, retainer, 0.125-inch diameter, and assembly, PCI latch and base

For price and availability, click request quote

HPE 237158-001
HPE 237158-001
HPE CD-ROM ejector rod assembly - Ejects the drive from the drive bay - Mounts next to the CD-ROM drive bay

For price and availability, click request quote

HPE 260741-001
HPE 260741-001
HPE 64MB SDRAM Small Outline Dual In-Line Memory Module (SODIMM) - Additional memory for the SmartArray 5i Plus controller - Plugs in the socket on the system I/O board

For price and availability, click request quote

HPE 270460-001
HPE 270460-001
HPE Scalable bus bar A - Includes cables (right)(power distribution component)

For price and availability, click request quote

HPE 270461-001
HPE 270461-001
HPE Power bus box (with A and B labels))(power distribution component)

For price and availability, click request quote

HPE 278461-001
HPE 278461-001
HPE Lever ejector kit - Includes levers and latches for memory cartridge, processor board, riser board, I/O drawer, drive cage, processor drawer and assembly, PCI latch and base, CBN, HPE (quantity five)

For price and availability, click request quote

HPE 289544-001
HPE 289544-001
HPE Hot-plug fan assembly - Includes 60mm x 38mm (2.4 x 1.5 inches) 44CFM fan in a hot-plug carrier with status LED - Five are used in the primary configuration and eight are used in a redundant fan or dual processor configuration

For price and availability, click request quote

HPE 289546-001
HPE 289546-001
HPE Front bezel assembly - Includes the front bezel with cut-outs for all drives, power button, and status indicator light pipe - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 289547-001
HPE 289547-001
HPE PCI slot expansion board ejector/divider - Mounts in the PCI card cage

For price and availability, click request quote

HPE 289548-001
HPE 289548-001
HPE Access panel - Top cover for the server - Includes cover latch - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 289552-001
HPE 289552-001
HPE 6-bay SCSI backplane PC board - Mounts on the rear of the front hard drive cage - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 289553-001
HPE 289553-001
HPE Front fan bracket - Hold six fans - Mounts between the hard drive bays and the system I/O board - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 289555-001
HPE 289555-001
HPE Plastics Kit - Includes PCI slot release lever, rear PCI lightpipe, PCI lightpipe cover, PCI riser cage door latch, PCI slot 1 thumbscrew with molded cap, and Battery Backed Write Cache (BBWC) Enabler bracket - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 289558-001
HPE 289558-001
HPE Rear fan bracket - Holds two fans - Mounts on the rear of the system I/O board - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 289561-001
HPE 289561-001
HPE PCI riser cage - Includes cage, PCI hot-plug PC board, and riser PC board

For price and availability, click request quote

HPE 289563-001
HPE 289563-001
HPE SCSI terminator board assembly - Plugs in the SCSI backplane board (in duplex SCSI configurations)

For price and availability, click request quote

HPE 289564-001
HPE 289564-001
HPE Processor Power Module (PPM) - Voltage regulator module - 12-volt, 81-amp - (part of 333713-B21)

For price and availability, click request quote

HPE 289567-001
HPE 289567-001
HPE Cable Kit - Includes short 68-pin SCSI cable, long 68-pin SCSI cable, and 50-pin SCSI system cable

For price and availability, click request quote

HPE 289569-001
HPE 289569-001
HPE Cable Kit - Includes floppy drive cable and interface cable for Smart Array 5i Plus memory module

For price and availability, click request quote

HPE 289570-001
HPE 289570-001
HPE Rack mount kit - Includes standard rack rail, slide assembly, left and right, and cable management arm, assembly - For racks with square holes

For price and availability, click request quote

HPE 300700-001
HPE 300700-001
HPE 512MB, 266MHz, PC2100, registered ECC DDR SDRAM DIMM memory module (184-pin) - (287496-B21, part of 300679-B21)

For price and availability, click request quote

HPE 313046-001
HPE 313046-001
HPE Hard drive blank (cover) - To fill empty 3.5-inch large form factor (LFF) drive bay slots

For price and availability, click request quote

HPE 313299-001
HPE 313299-001
HPE Hot-plug AC 400W power supply - 110/220VAC, 47-63Hz input - +12VDC, -12VDC, and +5VDC output - For StorageWorks NAS B2000 (version 2)

For price and availability, click request quote

HPE 314669-001
HPE 314669-001
HPE Intel Xeon processor - 3.06GHz (Prestonia, 533MHz front side bus, 512KB ATC cache, 604-pin) with heat sink

For price and availability, click request quote



HPE 314670-001
HPE 314670-001
HPE System board - For use with 2.8GHz, 3.06GHz, and 3.2GHz processors - 533MHz front side bus - Includes processor cage and system battery

For price and availability, click request quote

HPE 314688-001
HPE 314688-001
HPE Plastic kit - Includes PCI slot release lever, battery backed-write cache enabler bracket, blank for tape drive, and blank for CD-ROM drive

For price and availability, click request quote

HPE 316052-001
HPE 316052-001
HPE DC power converter module with backplane - Interconnects the power supplies to the system - Mounts in front of the power supplies - For use with 2.8GHz, 3.06GHz, and 3.20GHz processors

For price and availability, click request quote

HPE 319602-001
HPE 319602-001
HPE Hard drive blank (cover) - To fill empty 3.5-inch large form factor (LFF) SCSI drive bay slots

For price and availability, click request quote

HPE 365962-001
HPE 365962-001
HPE Plastics kit - Includes four feet (Graphite color), stand-off bumper, cable clip, PCI retainer clip, PCI latch and base assembly, fasteners, clips, and door receptacle

For price and availability, click request quote

HPE 367666-001
HPE 367666-001
HPE Tape drive blank (cover) - To fill empty slot above the hard drive when a tape drive is not installed (For SCSI model servers only)

For price and availability, click request quote

HPE 371148-001
HPE 371148-001
HPE Front fan bracket - Hold six fans - Mounts between the hard drive bays and the system I/O board

For price and availability, click request quote

HPE 376479-001
HPE 376479-001
HPE Plastics kit - Includes two each of the following: PC card short guide, PC card tall guide, PCI card latch (Carbon Black), PCI card latch (Blue), PCI card guide retainer (Carbon Black), and PCI card guide retainer (Blue)

For price and availability, click request quote

HPE 399311-001
HPE 399311-001
HPE 1.44MB Slimline floppy disk drive (Carbon Black) - 12.7mm (0.5 inch) height - Mounts in the multi-media drive bay

For price and availability, click request quote

HPE 399401-001
HPE 399401-001
HPE IDE Slimline CD-ROM optical drive (Carbon Black) - 24X CD-read - 68-pin connector, 12.7mm (0.5 inch) height - Mounts in the multi-media drive bay

For price and availability, click request quote

HPE 409431-001
HPE 409431-001
HPE Plastics kit - Includes foot (carbonite), receptacle, door snap, stone, PCI retainer, card guide, clip, cable, adhesive, retainer, and torx tool retainer

For price and availability, click request quote

HPE 411025-001
HPE 411025-001
HPE SCSI terminator board assembly - Plugs in the SCSI backplane board (in duplex SCSI configurations)

For price and availability, click request quote

HPE 411026-001
HPE 411026-001
HPE Power button switch / status LED indicator board assembly - Includes the power switch, UID switch, and status LEDs - Mounts on the right side of the server

For price and availability, click request quote

HPE 454348-001
HPE 454348-001
HPE Plastics kit - Includes screws, removable and fixed hard disk drive blanks, air baffle, optical blank, torx L-wrench, torx key, non-hot-plug power supply cover, power supply blank, PCI guides/latch

For price and availability, click request quote